top of page

Pipe Fabrication and Support

cutting machine
fabrication
Pipe Weights -Eco Bags

Pipe Weights -Eco Bags

Advantages of ECOBAG Bag Weight:

 

  • No special hoppers or equipment needed.

  • Ease of filling in remote locations.

  • Up to 1500 weights can be shipped in one container.

  • Fill 150 weights per day with 4 men.

  • Free Standing after filling.

  • Super strong double layer woven polypropylene material.

  • Cathodic protection is unrestricted.

  • Geotextile material will not harm pipe coating.

  • No spreader bars required to lift.

  • Easy to place on pipe.

  • Hooks can be removed from the top of the ditch.

Units available for rental or purchase

Additional Info

 

Category: Pipe Fabrication and Support

1
12” - 16’’ Pipeline Cone

Pipeline Cone 12” - 16’’

Description:

 

  • Height - 19”.

  • Base - 24”.

  • Weight - 25 lbs (11.34 KGS).

  • Maximum Capacity -  12, 125lbs. (5500 KGS).

 

Pipe cones may also be available in larger sizes.

 

Units available for rental or purchase

Additional Info

 

Category: Pipe Fabrication and Support

2
2” - 8’’ Pipeline Cone

Pipeline Cone 2” - 8’’

Description

  • Height - 22”.

  • Base - 24”.

  • Weight - 10 lbs (4.54 KGS).

  • Maximum Capacity - 1,450 lbs. (660 KGS).

Units available for rental or purchase 

Additional Info

 

Category: Pipe Fabrication & Support

3
pipeline cone

Pipeline Cone 4-12"

  • Height 19".

  • Base 24".

  • Weight 13 lbs. (5.9 kg).

  • Maximum Capacity 8,050 lbs. (3650 kg).

Units available for rental or purchase

Additional Info

 

Category: Pipe Fabrication & Support

4
Beveler - Saddle

Beveler - Saddle

Description:
Available
Each H & M machine is constructed of durable, lightweight, hard-anodized aluminum for easy transportation to any job site for cutting and beveling 2″ to 36″ pipe precisely, quickly and economically, even under the toughest conditions.

 

Units available for rental or purchase

Additional Info

 

Category: Cutting & Aligning tools + Pipe Fabrication & Support

Bevelling Bands

Bevelling Bands

Description:

 

Available for pipe sizes 10” to 72”.
Units available for rental or purchase.

 

Features

  • Adaptable to any beveling requirement.

  • Smoothly, accurately cut and bevel.

  • Minimum clearance needed in bell holes.

  • Out of round pipe attachment unnecessary.

  • Mounts easily anywhere on the pipe.

Units available for rental or purchase 

Additional Info

Category: Cutting & Aligning tools + Pipe Fabrication & Support

5
6
Demag Equipment

Demag Equipment

Description :

 

Demag Demagnetizing Equipment Using the Demag Solutions Pipeline Demagnetizing Bundle, high-quality welds that pass tough inspections can be made quickly and efficiently. The Demag bundle also provides the ability to reverse-current through the demagnetizing cable without having to rewrap the cable around the pipe.
Demag’s Demagnetizing Bundle weighs 64 pounds, operates off of 100V to 250V, and includes the following:

  • Power controller.

  • 100 ft. demagnetizing cable.

  • Gaussmeter with probe and zero gauss chamber.

  • Transit case with wheels.

  • Circuit-protected 30-amp inline GFCI circuit breaker for safety.

  • The Demag Demagnetizing Bundle can help you get back on schedule, reduce welding delays, and increase job performance.

Units available for rental or purchase

Additional Info

Category: Pipe Fabrication & Support

8
Rotary – Reed Cutter

Elbow Jigs

Description:

 

Precision fit and clamp allows for quick and easy fitting, prepping, and welding of elbows for use with welding positioners.

 

Units available for rental or purchase

9
Electric Crawler Motor

Electric Crawler Motor

Description:

 

  • Fits all Compact, Quick-set and Band-type beveling transmissions.

  • Industrial grade fully-enclosed gear motor for durability and long life.

  • Increased speed control range allows flame or plasma cutting.

  • Extension cords and plugs are water resistant per IP 67 and are arctic and flame resistant.

  • Cast aluminum motor mount increases durability and rigidity.

  • High visibility yellow polyamide control box with integrated handle.

  • Shielded magnet included on the control box for attachment to pipe during use.

Units available for rental or purchase 

Additional Info

Category: Cutting & Aligning tools + Pipe Fabrication & Support

10
Electric Crawler Motor

Foam Pillows

Description:

 

It is used to set pipe on, supports from bottom and keeps off the ground.

 

Units available for rental or purchase

11
Low Clearance Cold Cutter

Gas Bags

Description:

It is used to block the pipe off from vapor gases.

Sizes available: 2-48”

Units available for rental or purchase

12
13
HD Pipe Stands

HD Pipe Stands

Description :

 

Our modular pipe support stands offer a range of customizable options that will meet your application’s needs. We can also custom engineer your stands for welding applications that require unique solutions.

HD2L-200U

  • Load Capacity - 4,000 lbs.

  • Diameter Range - 2"-48".

  • Height Range - 24"-36".

  • Footprint - 30" x 31" x 26" (top of wheel).

  • Weight - 138 lbs.

HD2-300U

 

  • Load Capacity - 4,000 lbs.

  • Diameter Range - 2"- 48".

  • Height Range - 39"-63".

  • Footprint - 34" x 31" x 40" (top of wheel).

  • Equipment Mass - 165 lbs.

Units available for rental or purchase 

Additional Info

Category: Pipe Fabrication & Support 

Brand: GRB

Electric Crawler Motor

High Pressure Air Bags

Description:

 

Use our air lifting bags under the most adverse conditions to relocate positions and align heavy machinery and odd-shaped loads.

 

Units available for rental or purchase

14
Rotary – Reed Cutter

High Pressure Nitrogen Regulator

Description:

Machined brass body. Polished chrome bonnet. Easy to read single scale 2 in gauges. 2 in tri-layered reinforced neoprene diaphragm. Heavy-duty mechanical stem type seat and nozzle assembly. 

 

Units available for rental or purchase

15
Low Clearance Cold Cutter

Low Clearance Cold Cutter

Description: 

 

Capable of cutting pipe 2” to 60” OD


Low Clearance cold cutters are ideal for pipe maintenance and construction work in nuclear and fossil power plants, pipelines, oil platforms, petrochemical plants and refineries, as well as shipbuilding, pharmaceutical, food beverage, and other high purity piping applications.

 

Units available for rental or purchase

Additional Info

Category: Cutting & Aligning tools + Pipe Fabrication & Support

16
Low Clearance Cold Cutter

Manual Baker Pumps

Description:

 

From pumping contaminated fluids , like industrial waste streams, to transferring aggressive chemicals, these pumps will do the job.

Units available for rental or purchase

17
Electric Crawler Motor

Mud Plug Kit

Description:

 

Temporary barrier against traces of gas.

Units available for rental or purchase

18
Multi Directional Rigging Rollers

Multi Directional Rigging Rollers

Description:

 

Our pipe rigging rollers are used for a variety of applications, in particular for installation of pipe into racks at refineries, power plants, and other industrial facilities. It has additional features handles on sides for safe and easy lifting and installation. Applications ideal for turning or pushing pipe in all directions. The design allows for clamping to I-beams or other support structures.

  • Load Capacity - 2,000 lbs (1 Ton Models).

  • Diameter Range - 2"- 24" OD.

  • Equipment Mass - 60 lbs.

  • Footprint - 15" x 22" x 6".

  • Beam Clamp Flange Size Range - 6–12" Flange Widths, up to 1" thick.

Units available for rental or purchase

Additional Info

Category: Pipe Lifting & Handling + Pipe Fabrication & Support

19
20
Pipe HD Roller Head

Pipe HD Roller Head

Description:

 

PR - 24 Heavy Duty Pipe Roller.
Recommended for rolling up to 36” pipe.

Units available or rental or purchase

Units available for rental or purchase

Additional Info

Category: Pipe Fabrication & Support

Low Clearance Cold Cutter

Pipe Wedges

Description:

 

Take the “ high/low” out of pipe.

Units available for rental or purchase

21
22
Pipe Welding Positioner
Pipe Welding Positioner

Pipe Welding Positioner

Description:

 

The pipe turning positioners are used for positioning heavy-wall, large diameter pipe for spooling application with large offset loads.

16P-700 Welding Positioner, 3000 lbs Load Capacity

  • Chucks available.

  • Elbow Jibs available.

  • Foot Controller available.

  • The unit works excellently when your job involves handling heavy workpieces. It allows you to adjust the rotating speed, height, and angle of the workpiece.

Units available for rental or purchase.


Features

 

  • Load Capacity - 3,000 lbs (at mounting plate).

  • Shipping Dimensions - 72" x 42" x 77".

  • Height Adjustability - 45"-69" in 4" increments.

  • Power Requirements - 110 V, 1-ph.

  • Rotation Speed - 0.3-3.0 RPM.

  • Ground Capacity - 400 Amps.

  • Equipment Mass - 1,820 lbs (excluding gripper).

30P-700 Welding Positioner, 5400 lbs Load Capacity

Chucks available.

Elbow Jibs available.

Foot Controller available.

The unit works excellently when your job involves handling heavy workpieces. It allows you to adjust the rotating speed, height, and angle of the workpiece.

Units available for rental or purchase.

Features:

 

  • Load Capacity - 5,400 lbs (at mounting plate).

  • Shipping Dimensions - 72" x 42" x 77".

  • Turning Torque - 40,000 in lbs.

  • Height Adjustability - 33" - 69" in 4" increments.

  • Power Requirements - 480 V, 3-ph.

  • Rotation Speed - 0.2-2.4 RPM.

  • Ground Capacity - 800 Amps.

  • Equipment Mass - 2,300 lbs (excluding gripper).

Units available for rental or purchase

Additional Info

Category: Pipe Fabrication & Support

23
Pipeline Skid/Cone Sloops

Pipeline Skid/Cone Sloops

Description:

 

Pipeline Skids:
4" x 6" x 48".
Sloops are available with or without skids/cones.

Units available for rental or purchase

Additional Info

Category: Pipe Fabrication & Support

Pipe Stand

Pipe Stands

 

Units available for rental or purchase

Additional Info

Category: Pipe Fabrication & Support

25
Rotary – Reed Cutter

Rotary – Reed Cutter

Description:

 

Cut pipe quickly and with minimal digging using Reed Low Clearance Rotary™ Cutters. The low profile design of the LCRC models needs only 4 inch clearance for up to 16 inch pipe diameter. Safe, clean, straight cuts are easy with these manual-operated cutters. They cold cut large diameter steel, most stainless steel, ductile, and cast iron pipe in close quarters. LCRC cutters are supplied with a slip-on handle that is used to turn and tighten the cutter. With good leverage from the tool's long handle, pipe snaps off squarely before the cutter wheels penetrate halfway through the pipe. Provides a square cut and can be used in close quarters anywhere – in the ditch, underwater, in noise-free zones, over head, in racks of pipes, etc. With general maintenance and cutter wheel replacement, Reed's Low Clearance Rotary™ Cutters last for decades.

Units available for rental or purchase

Additional Info

Category: Cutting & Aligning tools + Pipe Fabrication & Support

26
Sand Bags

Sand Bags

Description:

 

40lbs polypropylene bags filled with sand

Units available for rental or purchase

Additional Info

Category: Geotextile & Fencing + Pipe fabrication and support

27
Sawdust Bags

Sawdust Bags

Description:

 

Used for leveling, stabilizing, padding and bedding pipe prior to backfilling the trench or ditch.

Units available for rental or purchase

Units available for rental or purchase

Additional Info

Category: Pipe Support and Protection

28
Skids

Skids

Description:

 

Available in 4’ or 5’ length.
Units available for rental or purchase 

Additional Info

Category: Pipe Fabrication & Support

29
Electric Crawler Motor

Test plug

Description:

 

Hydrostatic pipe testing and isolation plugs.

 

Units available for rental or purchase

Electric Crawler Motor

Wachs Cutters Out Around Attachment

Description:

 

Out around attachments are the world’s most versatile and comprehensive line of clamshell style, portable pipe cutting and beveling machine tools on the market today. Designed to cut, bevel, single point, counterbore and face flanges on pipe.

Units available for rental or purchase

30
31
call icon

Pipe Fabrication Products

Choose us for fabrication products rental or purchase and support services in Fort St. John!

bottom of page