
Pipe Lifting & Handling




Auto Release Tong (Calipers)
Category: Pipe Lifting & Handling
Description:
Sizes range from 2” to 16”.
Auto Release Tongs are designed to permit an automatic release of the pipe when the lift line is slacked off.
They are built to withstand the tough conditions encountered in pipeline construction.
Technical concept on the workings of an Auto Release Tong
-
Pipe tong is lowered onto the pipe.
-
As the pipe tong is lifted, its design allows it to grab the pipe (pipe should be lifted straight up).
-
The heavier the pipe, the harder the grip. (Do not exceed the recommended lifting capacity).
-
When the pipe is lowered and the weight is slacked, the tong releases the pipe automatically.
Units available for rental or purchase
Additional Info
Category: Pipe Lifting

Endless Slings
Category: Pipe Coatings & Supplies + Pipe Lifting & Handling
Description :
We carry a large variety of flexible, durable, woven fabric slings, used to support or raise an amount of weight.
Pipeline supplies, lifting, and handling.
Contact us for more details!
Polyester and Cordura Round Slings
**CORDURA ROUND SLINGS ARE SAME SIZE AND CAPACITY USE “CR” INSTEAD OF “PR”
Units available for rental or purchase

HD Horizontal Rollers
Category: Pipe Lifting & Handling
Description :
Our adjustable 2”- 48” HD horizontal roller is designed with the end user in mind, and allows the customer to adjust the roller to fit their specific job. Adjustments can be done in-house before the pipe rollers are shipped out to site. Despite being adjustable these rollers are the most rugged we have ever built boasting a whopping 50,000 lbs capacity. This allows them to be spread out farther than typical rollers for large diameter pipe which helps to cut costs. Units available for rental or purchase.
-
Size ranges from 2” to 48”.
-
Load Capacity: 15,000 LBS (6,804 kg).
-
Pipe Diameter Range: up to 48” (1219 mm).
-
Weight: 1300 LBS (590 kg).
-
Foot Print: 69 ¼” × 49 ¼” × 29 ¼” (Stackable up to 3 high).
For 2” - 36”, Load Capacity: 8400 LBS.
For 2” - 48”, Load Capacity: 15,000 LBS.
Units available for rental or purchase

Horizontal Rollers
Category: Pipe Lifting & Handling
Description :
-
Diameter Range: 2"– 48''.
-
Rolling Surface: Conical style, urethane cones protect pipe.
-
Applications: Helps protect exterior of pipe (coatings/yellow jacket) during crossing installations (i.e. river, road, crossings) and reduces drag/pulling forces substantially.
-
Capacity - 4000 LBS.
Units available for rental or purchase
Additional Info
Category: Pipe Lifting

Lowering-In Belt
Category: Pipe Lifting & Handling
Description:
Nylon Pipeline Lowering-In-Belts are made from top-grade material including alloy steel end irons and abrasion resistant nylon, coated for a longer life. Nylon belts are strong enough to satisfy your strength requirements and lightweight and flexible for maximum ease of handling. Comes in standard or special belts through 60”, 1524 mm wide.
Meets industry standard B30.20 design factor.
Units available for rental or purchase
Additional Info
Category: Pipe Support and Protection

Multi Directional Rigging Rollers
Category: Pipe Lifting & Handling + Pipe Fabrication & Support
Description :
Our pipe rigging rollers are used for a variety of applications, in particular for installation of pipe into racks at refineries, power plants, and other industrial facilities. It has additional features handles on sides for safe and easy lifting and installation. Applications ideal for turning or pushing pipe in all directions. The design allows for clamping to I-beams or other support structures.
-
Load Capacity - 2,000 lbs (1 Ton Models).
-
Diameter Range - 2"- 24" OD.
-
Equipment Mass - 60 lbs.
-
Footprint - 15" x 22" x 6".
-
Beam Clamp Flange Size Range - 6–12" Flange Widths, up to 1" thick.
Units available for rental or purchase

Pipe Hooks / Stringing Hooks
Single construction pipe hooks with Teflon inserts to protect the pipe level. These hooks come in three sizes, each with a 5:1 safety rating. Each hook covers a vast range of pipe diameters. Units available for rental or purchase.
Units available for rental or purchase
Additional Info
Category: Bevelling

Rollie Cradles
Category: Pipe Lifting & Handling
Rollie Cradles are cradles that wrap around the pipe. The cradle forms a continuous roller surrounding the lower half of the pipe. Choose from cradles for pipe from 2" to 60" (60.3 mm – 1524 mm) in diameter.
Description:
-
Cradles pipes from 2" to 60" (60.3 mm – 1524 mm) in diameter.
-
Rollie Cradles are cradles that wrap around the pipe.
-
The cradle forms a continuous roller surrounding the lower half of the pipe.
Features:
-
Pipe can be kept close to the ground allowing operators more control and mobility.
-
One size handles a wide range of pipe sizes.
-
Antifriction bearings lower rolling resistance.
-
Multiple polyurethane rollers spaced equally to support the pipe evenly eliminating "egging" of the pipe.
-
The polyurethane rollers make it ride easily over weld seams without hanging up.
-
The design provides quick disassembly for transit and storage.
-
Polyurethane rollers eliminate pipe coating damage.
Sizes:
-
2’’ - 6’’.
-
3’’ - 12’’.
-
12’’ - 24’’.
-
24’’ - 36’’.
-
30’’ - 42’’.
-
36’’ - 48’’.
-
48’’ - 60’’.
Units available for rental or purchase
Additional Info
Category: Pipe Lifting

Rubber Tired Cradles
Category: Pipe Lifting & Handling
Description:
-
Sizes available to do 4” - 36” pipe.
-
Supports and safely guides the pipe during the lowering-in operation.
-
Pneumatic tires are mounted on a strong frame with pipe guide rollers, cables and head iron.
-
Insulated, coated, and wrapped pipe can be handled without damage.
Units available for rental or purchase
Additional Info
Category: Pipe Lifting

Rollie Cradles
A Pipe Stringing Chute is designed for safely and easily stringing pipe off the truck trailer onto the ground during pipe stringing. Two roller assemblies mount onto the loaded truck trailer. As the truck slowly moves, the pipe is rolled, one at a time, onto the roller assemblies and pushed down the attached chute onto the ground.
Accommodates pipe sizes 2" through 8" (50.8mm – 203.2 mm).
Units available for rental or purchase
Additional Info
Category: Pipe Handling

Vacuworx
Description:
Vacuum lifting systems are compact and built for use with compact host vehicles, making them ideal for lower weight requirements and smaller material quantities. They have lift capacities ranging from 6,600 to 11,000 lb, making them excellent for utility and in-plant applications (3-5 tons). The MC 3 is powered by a gas engine that is self-contained.