Pipe Fabrication and Support
Beveler - Saddle
Description:
Available
Each H & M machine is constructed of durable, lightweight, hard-anodized aluminum for easy transportation to any job site for cutting and beveling 2″ to 36″ pipe precisely, quickly and economically, even under the toughest conditions.
Units available for rental or purchase
Additional Info
Category: Cutting & Aligning tools + Pipe Fabrication & Support
Bevelling Bands
Description:
Available for pipe sizes 10” to 72”.
Units available for rental or purchase.
Features
- Adaptable to any beveling requirement.
- Smoothly, accurately cut and bevel.
- Minimum clearance needed in bell holes.
- Out of round pipe attachment unnecessary.
- Mounts easily anywhere on the pipe.
Units available for rental or purchase
Additional Info
Category: Cutting & Aligning tools + Pipe Fabrication & Support
Demag Equipment
Description :
Demag Demagnetizing Equipment Using the Demag Solutions Pipeline Demagnetizing Bundle, high-quality welds that pass tough inspections can be made quickly and efficiently. The Demag bundle also provides the ability to reverse-current through the demagnetizing cable without having to rewrap the cable around the pipe.
Demag’s Demagnetizing Bundle weighs 64 pounds, operates off of 100V to 250V, and includes the following:
- Power controller.
- 100 ft. demagnetizing cable.
- Gaussmeter with probe and zero gauss chamber.
- Transit case with wheels.
- Circuit-protected 30-amp inline GFCI circuit breaker for safety.
- The Demag Demagnetizing Bundle can help you get back on schedule, reduce welding delays, and increase job performance.
Units available for rental or purchase
Additional Info
Category: Pipe Fabrication & Support
Electric Crawler Motor
Description:
- Fits all Compact, Quick-set and Band-type beveling transmissions.
- Industrial grade fully-enclosed gear motor for durability and long life.
- Increased speed control range allows flame or plasma cutting.
- Extension cords and plugs are water resistant per IP 67 and are arctic and flame resistant.
- Cast aluminum motor mount increases durability and rigidity.
- High visibility yellow polyamide control box with integrated handle.
- Shielded magnet included on the control box for attachment to pipe during use.
Units available for rental or purchase
Additional Info
Category: Cutting & Aligning tools + Pipe Fabrication & Support
HD Pipe Stands
Description :
Our modular pipe support stands offer a range of customizable options that will meet your application’s needs. We can also custom engineer your stands for welding applications that require unique solutions.
HD2L-200U
- Load Capacity - 4,000 lbs.
- Diameter Range - 2"-48".
- Height Range - 24"-36".
- Footprint - 30" x 31" x 26" (top of wheel).
- Weight - 138 lbs.
HD2-300U
- Load Capacity - 4,000 lbs.
- Diameter Range - 2"- 48".
- Height Range - 39"-63".
- Footprint - 34" x 31" x 40" (top of wheel).
- Equipment Mass - 165 lbs.
Units available for rental or purchase
Additional Info
Category: Pipe Fabrication & Support
Brand: GRB
Low Clearance Cold Cutter
Description:
Capable of cutting pipe 2” to 60” OD
Low Clearance cold cutters are ideal for pipe maintenance and construction work in nuclear and fossil power plants, pipelines, oil platforms, petrochemical plants and refineries, as well as shipbuilding, pharmaceutical, food beverage, and other high purity piping applications.
Units available for rental or purchase
Additional Info
Category: Cutting & Aligning tools + Pipe Fabrication & Support
Multi Directional Rigging Rollers
Description :
Our pipe rigging rollers are used for a variety of applications, in particular for installation of pipe into racks at refineries, power plants, and other industrial facilities. It has additional features handles on sides for safe and easy lifting and installation. Applications ideal for turning or pushing pipe in all directions. The design allows for clamping to I-beams or other support structures.
- Load Capacity - 2,000 lbs (1 Ton Models).
- Diameter Range - 2"- 24" OD.
- Equipment Mass - 60 lbs.
- Footprint - 15" x 22" x 6".
- Beam Clamp Flange Size Range - 6–12" Flange Widths, up to 1" thick.
Units available for rental or purchase
Additional Info
Category: Pipe Lifting & Handling + Pipe Fabrication & Support
Pipe Welding Positioner
Description :
The pipe turning positioners are used for positioning heavy-wall, large diameter pipe for spooling application with large offset loads.
16P-700 Welding Positioner, 3000 lbs Load Capacity
- Chucks available.
- Elbow Jibs available.
- Foot Controller available.
- The unit works excellently when your job involves handling heavy workpieces. It allows you to adjust the rotating speed, height, and angle of the workpiece.
Units available for rental or purchase.
Features
- Load Capacity - 3,000 lbs (at mounting plate).
- Shipping Dimensions - 72" x 42" x 77".
- Height Adjustability - 45"-69" in 4" increments.
- Power Requirements - 110 V, 1-ph.
- Rotation Speed - 0.3-3.0 RPM.
- Ground Capacity - 400 Amps.
- Equipment Mass - 1,820 lbs (excluding gripper).
30P-700 Welding Positioner, 5400 lbs Load Capacity
Chucks available.
Elbow Jibs available.
Foot Controller available.
The unit works excellently when your job involves handling heavy workpieces. It allows you to adjust the rotating speed, height, and angle of the workpiece.
Units available for rental or purchase.
Features:
- Load Capacity - 5,400 lbs (at mounting plate).
- Shipping Dimensions - 72" x 42" x 77".
- Turning Torque - 40,000 in lbs.
- Height Adjustability - 33" - 69" in 4" increments.
- Power Requirements - 480 V, 3-ph.
- Rotation Speed - 0.2-2.4 RPM.
- Ground Capacity - 800 Amps.
- Equipment Mass - 2,300 lbs (excluding gripper).
Units available for rental or purchase
Additional Info
Category: Pipe Fabrication & Support
Rotary – Reed Cutter
Description:
Cut pipe quickly and with minimal digging using Reed Low Clearance Rotary™ Cutters. The low profile design of the LCRC models needs only 4 inch clearance for up to 16 inch pipe diameter. Safe, clean, straight cuts are easy with these manual-operated cutters. They cold cut large diameter steel, most stainless steel, ductile, and cast iron pipe in close quarters. LCRC cutters are supplied with a slip-on handle that is used to turn and tighten the cutter. With good leverage from the tool's long handle, pipe snaps off squarely before the cutter wheels penetrate halfway through the pipe. Provides a square cut and can be used in close quarters anywhere – in the ditch, underwater, in noise-free zones, over head, in racks of pipes, etc. With general maintenance and cutter wheel replacement, Reed's Low Clearance Rotary™ Cutters last for decades.
Units available for rental or purchase
Additional Info
Category: Cutting & Aligning tools + Pipe Fabrication & Support
Wachs Cutters Out Around Attachment
Description:
Out around attachments are the world’s most versatile and comprehensive line of clamshell style, portable pipe cutting and beveling machine tools on the market today. Designed to cut, bevel, single point, counterbore and face flanges on pipe.
Units available for rental or purchase
